|
|
|
National Stock Number:
5310-00-662-0124
Federal Supply Class:
5310
National Item Identification Number:
006620124
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10013023 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | S8164-33 | 70210 | HONEYWELL INTERNATIONAL INC. | | S8164-33 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | | S8164-33 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.501 INCHES MINIMUM AND 0.502 INCHES MAXIMUM | | OVERALL DIAMETER | 0.760 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 100.0 MICROINCHES INNER | | SURFACE FINISH | 100.0 MICROINCHES OUTER | | THICKNESS | 0.049 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
|
|