|
|
|
National Stock Number:
5310-00-660-2215
Federal Supply Class:
5310
National Item Identification Number:
006602215
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10121579 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 310-0740-500 | 13499 | ROCKWELL COLLINS, INC. | | 5310-000-0010 | FARD5 | 2EME REGIMENT DU MATERIEL (RMAT)DETACHEMENT DE SALBRIS | | 5310-000-0010 | FCAG0 | SEC COMMISSION INTERARMEES MUNITIONS CODES ANNEXES DE GESTION | | 5310PL1352785 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | NAS620A10L | 10630 | ANILLO INDUSTRIES INC | | NAS620A10L | 1L160 | SUPERIOR WASHER & GASKET CORP. | | NAS620A10L | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | NAS620A10L | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | NAS620A10L | 5R386 | T.P.S. AVIATION INC | | NAS620A10L | 77272 | THE BOEING COMPANY | | NAS620A10L | 78022 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | NAS620A10L | 78286 | SIKORSKY AIRCRAFT CORPORATION | | NAS620A10L | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS620A10L | 81205 | THE BOEING COMPANY | | SS2-31-A | 29440 | W. M. BERG INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL DIAMETER | 0.349 INCHES MINIMUM AND 0.369 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 5052 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.032 INCHES NOMINAL |
|
|