|
|
|
National Stock Number:
5310-00-659-4619
Federal Supply Class:
5310
National Item Identification Number:
006594619
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| BACN10DR6C | 81205 | THE BOEING COMPANY | | BACN10DR6C | 82918 | THE BOEING COMPANY |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.036 INCHES MINIMUM AND 0.046 INCHES MAXIMUM | | BEARING SURFACE TYPE | CHAMFERED | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL BOTH ENDS | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-763 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 347 OVERALL | | NOMINAL THREAD SIZE | 0.562 INCHES | | NUT HEIGHT | 0.260 INCHES MINIMUM AND 0.282 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | SPECIAL FEATURES | 2 EACH DRILLED LOCKWIRE HOLES IN HEX 180 DEGREES APART,0.070 IN. DIA HOLES,0.046 IN. C TO C OF HOLES | | WIDTH ACROSS FLATS | 0.809 INCHES MINIMUM AND 0.817 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNJF |
|
|