|
|
|
National Stock Number:
5310-00-659-3895
Federal Supply Class:
5310
National Item Identification Number:
006593895
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10545168 | 19200 | US ARMY ARDEC RDECOM | | 5310006593895 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 7837663P0017 | 03538 | LOCKHEED MARTIN CORPORATION | | 7837663P17 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | OVERALL DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 417,GR SC612 MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER SYNTHETIC OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.043 INCHES MINIMUM AND 0.051 INCHES MAXIMUM |
|
|