| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/3,ALLOY 2014,TEMPER T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/5,ALLOY 2024,TEMPER T3 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/5,T42 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-250/13,ALLOY 7075,TEMPER T6 FED SPEC 4TH MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 OVERALL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| NUT LENGTH | 1.281 INCHES NOMINAL |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| NUT STYLE | PLATE NUT SPACER |
| PLATE THICKNESS | 0.090 INCHES NOMINAL |
| PLATE WIDTH | 0.516 INCHES NOMINAL |
| SPECIAL FEATURES | DYED ORANGE |
| SPECIFICATION/STANDARD DATA | 80205-NAS463 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| THRU-HOLE DIAMETER | 0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |