|
|
|
National Stock Number:
5310-00-655-5824
Federal Supply Class:
5310
National Item Identification Number:
006555824
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| S716-26 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.076 INCHES NOMINAL | | DRIVE POINT DEPTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | COUNTERSINK ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 4 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-596 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY OVERALL | | NOMINAL THREAD SIZE | 1.625 INCHES | | NUT DIAMETER | 2.110 INCHES MINIMUM AND 2.130 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 12 | | THREAD SERIES | UN |
|
|