|
|
|
National Stock Number:
5310-00-652-9333
Federal Supply Class:
5310
National Item Identification Number:
006529333
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| CVC754B20E10 | 80378 | TRIUMPH AEROSTRUCTURES, LLC | | SWAL1010-02LV | 19315 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | | SWAL1010-02LV | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | BOTTOM RECESS DIAMETER | 0.166 INCHES NOMINAL | | HOLE DIAMETER | 0.156 INCHES MINIMUM AND 0.161 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS DIAMETER | 0.166 INCHES NOMINAL |
|
|