|
|
|
National Stock Number:
5310-00-641-9714
Federal Supply Class:
5310
National Item Identification Number:
006419714
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 506-5909-003 | 13499 | ROCKWELL COLLINS, INC. | | 506-5909-003 | 95105 | ROCKWELL COLLINS, INC. | | 567308-1 | 57733 | STEWART-WARNER CORPORATION | | 91G1544-1 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | WA1234-1 | 80249 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.257 INCHES NOMINAL | | OVERALL DIAMETER | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.0136 INCHES MINIMUM AND 0.0176 INCHES MAXIMUM |
|
|