|
|
|
National Stock Number:
5310-00-641-9236
Federal Supply Class:
5310
National Item Identification Number:
006419236
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 19209 | 82340 | L3HARRIS TECHNOLOGIES, INC. | | 46A8702 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC | | 46A8702 | C0297 | GOODRICH CONTROL SYSTEMS GMBH | | 67H94-1 | 11660 | WESTINGHOUSE ELECTRIC CORP CONTROL BUSINESS UNIT | | 67H94-1 | 79500 | WESTINGHOUSE ELECTRIC CORP | | EMP18684 | 24380 | EMPIRE MFG CO INC | | PW026-10L | 13783 | SMALL LOT STAMPING DIV OF VSI CORP PRODUCTS |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM | | OVERALL DIAMETER | 0.341 INCHES MINIMUM AND 0.347 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 321 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
|
|