|
|
|
National Stock Number:
5310-00-639-1603
Federal Supply Class:
5310
National Item Identification Number:
006391603
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 95604 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM | | OVERALL DIAMETER | 0.770 INCHES MINIMUM AND 0.790 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2480 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | THICKNESS | 0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
|
|