|
|
|
National Stock Number:
5310-00-638-7160
Federal Supply Class:
5310
National Item Identification Number:
006387160
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 30-2661 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.136 INCHES NOMINAL | | DRIVE POINT DEPTH | 0.150 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.150 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE TYPE AND QUANTITY | 5 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 OVERALL | | NOMINAL THREAD SIZE | 1.375 INCHES | | NUT DIAMETER | 1.930 INCHES MINIMUM AND 1.970 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | SMALL END DIAMETER | 1.560 INCHES NOMINAL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 12 | | THREAD SERIES | UNF | | UNDERCUT THICKNESS | 0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
|
|