|
|
|
National Stock Number:
5310-00-637-4000
Federal Supply Class:
5310
National Item Identification Number:
006374000
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 62210 | 99688 | BERGSTROM INC | | 97440 | 73734 | FEDERAL SCREW PRODUCTS INC. | | A864-50893G1 | 46522 | DCM MANUFACTURING, INC. | | P5358 | 30299 | FLEXIBLE TECHNOLOGIES INC | | S-4281 | 77210 | SYNTERIALS INC. | | S1450-3-10-032 | 71379 | CESSNA AIRCRAFT COMPANY | | S1450-3-10-032 | 7EK50 | TEXTRON AVIATION INC | | S18262-22 | 04868 | HEINZ MUELLER ELECTRICAL CO INC | | S428-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | TD340 | 5RQL2 | DRS ENVIRONMENTAL SYSTEMS INC | | TD340 | 90598 | ENGINEERED AIR SYSTEMS INC. DBA DRS SUSTAINMENT SYSTEMS | | TD340 | 92878 | HDT EXPEDITIONARY SYSTEMS INC | | TD340B | 5RQL2 | DRS ENVIRONMENTAL SYSTEMS INC | | TD340B | 90598 | ENGINEERED AIR SYSTEMS INC. DBA DRS SUSTAINMENT SYSTEMS | | TD340B | 92878 | HDT EXPEDITIONARY SYSTEMS INC | | W11242-3 | 28835 | HOBART BROS CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.203 INCHES NOMINAL | | OVERALL DIAMETER | 0.625 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.031 INCHES NOMINAL |
|
|