|
|
|
National Stock Number:
5310-00-637-3992
Federal Supply Class:
5310
National Item Identification Number:
006373992
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| PGF9263 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | PGF9263 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| HOLE DIAMETER | 2.281 INCHES MINIMUM AND 2.344 INCHES MAXIMUM | | OUTSIDE DIAMETER | 4.500 INCHES NOMINAL | | OVERALL HEIGHT | 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY 937 OVERALL | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | RECESS DEPTH | 0.031 INCHES NOMINAL | | RECESS DIAMETER | 2.343 INCHES MINIMUM AND 2.406 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED |
|
|