|
|
|
National Stock Number:
5310-00-637-1375
Federal Supply Class:
5310
National Item Identification Number:
006371375
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 1214445-1 | 02987 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX FLIGHT SYSTEMS FIV MONTROSE OPNS | | 1214445-1 | 19315 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | | 1214445-1 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 1214445-1 | 96774 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| COUNTERSINK ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM NUT | | CROSS-SECTIONAL SHAPE | HEXAGONAL NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-268,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | NOMINAL THREAD SIZE | 0.562 INCHES | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM | | NUT WIDTH ACROSS FLATS | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | SPECIAL FEATURES | BLACK ANODIZE | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNF |
|
|