|
|
|
National Stock Number:
5310-00-634-9120
Federal Supply Class:
5310
National Item Identification Number:
006349120
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10121570 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 10430-5 | 12909 | CARDION INC | | 10430-5 | 20284 | AIMTRON SYSTEMS, LLC | | 2037AS750-03 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 20993 | 78640 | MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC | | 2164 | 2R182 | SMITH H H CO | | 2164 | 83330 | DIALIGHT CORPORATION | | 2164 | 91967 | HALSIT HOLDINGS LLC | | 420-73-0013 | 82577 | RAYTHEON COMPANY | | 5600-4-16 | 86298 | CREPE KRAFT CO | | 851297 | 35211 | LAUSON DIVISION OF TECUMSEH PRODUCTS CO | | 851297 | 66289 | WISCONSIN MOTORS LLC | | 9336C3009-4 | 87557 | LOCKHEED CORP LOCKHEED ELECTRONICS CO INC | | 9336C3009-4 | 94117 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.196 INCHES NOMINAL | | OVERALL DIAMETER | 0.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-20085 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | CELLULOSE OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.062 INCHES NOMINAL |
|
|