5977-00-536-2415 BRUSH,ELECTRICAL CONTACT Index 6105-00-536-2420 MOTOR,DIRECT CURRENT

National Stock Number:
5310-00-536-2417

Federal Supply Class:
5310

National Item Identification Number:
005362417

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
IN1060B80249BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.219 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
OVERALL DIAMETER0.560 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
MATERIALPLASTIC OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.059 INCHES MINIMUM AND 0.061 INCHES MAXIMUM


Click here to Register for Free 30-day Trial