|
|
|
National Stock Number:
5310-00-535-0112
Federal Supply Class:
5310
National Item Identification Number:
005350112
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 103974-01 | 35351 | GE AVIATION SYSTEMS LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.109 INCHES NOMINAL | | OVERALL DIAMETER | 0.343 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1117 OR STEEL COMP 1212 OR STEEL COMP 1213 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | NONE CORNER EDGE OF OD IS CHAMFERED TO 45 DEG ANGLE BY 0.065 IN. LG | | SURFACE TREATMENT | OXIDE FILM OVERALL | | THICKNESS | 0.071 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
|
|