6625-00-533-4737 EXTENDER CARD,ELECTRONIC TEST Index 4730-00-533-4743 ELBOW,FLANGE TO TUBE

National Stock Number:
5310-00-533-4742

Federal Supply Class:
5310

National Item Identification Number:
005334742

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
185741216764GENERAL MOTORS CORP DELCO REMY DIV
18574121LW55BORGWARNER PDS (ANDERSON), L.L.C.
185741224617GENERAL MOTORS CORP
18574127X677GENERAL MOTORS LLC
3439554123COLSON CORP THE
533474219207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
583K95783299HYSTER-YALE GROUP, INC.
85213812603CLARK EQUIPMENT CO
85213889749CLARK MATERIAL HANDLING COMPANY
9B893811083CATERPILLAR INC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.191 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1010 OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
OVERALL DIAMETER0.359 INCHES NOMINAL
THICKNESS0.020 INCHES MINIMUM AND 0.026 INCHES MAXIMUM


Click here to Register for Free 30-day Trial