|
|
|
National Stock Number:
5310-00-171-6116
Federal Supply Class:
5310
National Item Identification Number:
001716116
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 093-10S | 72020 | DYNEER CORP | | 535161 | 78992 | CHRYSLER CORP DETROIT UNIVERSAL DIV | | 563099 | 12204 | DAIMLER CHRYSLER | | 644226 | 58275 | SASCO INC CANADIAN DIV | | 65P1 | 56442 | DIAMOND REO TRUCK CO | | 7097273 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.906 INCHES NOMINAL | | OVERALL DIAMETER | 1.781 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | C-F-206,TYPE 1,CL 12R3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | WOOL COMP 12R3 OVERALL | | MINIMUM TENSILE STRENGTH | 250 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.156 INCHES NOMINAL |
|
|