5310-00-167-0796 WASHER,FLAT Index 5310-00-167-0799 WASHER,FLAT

National Stock Number:
5310-00-167-0797

Federal Supply Class:
5310

National Item Identification Number:
001670797

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
004-003081-00426916NORTHROP GRUMMAN SYSTEMS CORPORATION
0188-407187HONEYWELL INTERNATIONAL INC.
0188-456232LOCKHEED MARTIN CORPORATION
100350-0-119565SYMBOLIC DISPLAYS, INC
10116603A486GNIMIKKEISTOKESKUS NCB FINLAND
153-0013-00294756THE BOEING COMPANY
236-1170P10D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
236M0010P0013B150RAYTHEON COMPANY
236M0010P00149956RAYTHEON COMPANY
24-00029-00300724RAYTHEON COMPANY
26016156-0280234VAPOR CORP SUB OF BRUNSWICK CORP
2611-111035S4276TOKYO AIRCRAFT INSTRUMENT CO. LTD
2W1C7-8-03243999THE BOEING COMPANY
310-0044-00D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
310-0044-000D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
5310001670797A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5310001670797SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
5310PL01507179009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
8372411312TELEDYNE DEFENSE ELECTRONICS, LLC
925001-000265597THALES USA, INC.
AN960C-3D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
AN960C381349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
AN960C388044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
H95516030388818KEARFOTT CORPORATION
M146-11754418MILTOPE CORPORATION
WR389944ELBITAMERICA, INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.095 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OVERALL AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE OVERALL AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE OVERALL AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 348 OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 GRADE AND B CLASS
OVERALL DIAMETER0.245 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA43999-2W1 MANUFACTURERS STANDARD
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us