|
|
|
National Stock Number:
5310-00-167-0714
Federal Supply Class:
5310
National Item Identification Number:
001670714
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| AN960A2116L | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.328 INCHES NOMINAL | | OVERALL DIAMETER | 2.057 INCHES MINIMUM AND 2.082 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-561 FED SPEC 1ST MATERIAL RESPONSE AND QQ-A-359 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 3003 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM |
|
|