5310-00-167-0699, WASHER,FLAT

National Stock Number:
5310-00-167-0699

Federal Supply Class:
5310

National Item Identification Number:
001670699

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

004-003081-021	26916	NORTHROP GRUMMAN SYSTEMS CORPORATION
1361223-21	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
2151000154	57057	NAVCOM DEFENSE ELECTRONICS, INC.
512-95N	1LQK8	KEYSIGHT TECHNOLOGIES, INC.
512-95N	28480	HEWLETT-PACKARD COMPANY
512-95N	7ZXR5	KEYSIGHT TECHNOLOGIES INC
5310PL0787116	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
8176677	18876	U S ARMY AVIATION AND MISSILE COMMAND
AN960B6	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
AN961-6T	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
FFW92TYPEAGRADE1	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
NAS1149B632H	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1149BN632H	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1149BN632H	A0126	LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE
S7588	97424	AMETEK INC

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.139 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
OVERALL DIAMETER	0.370 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-613 FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL	COPPER ALLOY 260 OR COPPER ALLOY 268 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
THICKNESS	0.026 INCHES MINIMUM AND 0.038 INCHES MAXIMUM

Click here to Register for Free 30-day Trial