|
|
|
National Stock Number:
5310-00-158-4557
Federal Supply Class:
5310
National Item Identification Number:
001584557
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 1128CVM40211-11 | 26437 | TRIUMPH ACTUATION SYSTEMS, LLC | | 1128CVM40211-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 1128CVM40211-11 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | CVM40211-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.046 INCHES NOMINAL | | COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL NUT | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION G | | HOLE TYPE AND QUANTITY | 4 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | NOMINAL THREAD SIZE | 0.750 INCHES | | NUT DIAMETER | 0.995 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | 4 WRENCHING FLATS | | WIDTH ACROSS FLATS | 0.875 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3B | | THREAD DIRECTION | LEFT-HAND | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UNF |
|
|