5310-00-151-5412, WASHER,FLAT

National Stock Number:
5310-00-151-5412

Federal Supply Class:
5310

National Item Identification Number:
001515412

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

10116587	A486G	NIMIKKEISTOKESKUS NCB FINLAND
NAS1401-5D3	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/3 TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/4 TEMPER T3 OR T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 ALCLAD TEMPER T3 OR T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 OVERALL
SPECIAL FEATURES	0.060 IN. RADIUS ALL CORNERS AND 0.090 IN. RADIUS ONE SIDE OF ONE END
PERIPHERAL SHAPE STYLE	SQUARE
SPECIFICATION/STANDARD DATA	80205-NAS1401 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH ACROSS FLATS	0.580 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE OR CHROMATE OVERALL
THICKNESS	0.090 INCHES NOMINAL

Click here to Register for Free 30-day Trial