|
|
|
National Stock Number:
5310-00-150-3686
Federal Supply Class:
5310
National Item Identification Number:
001503686
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| MS19068-222 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.188 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.485 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | COUNTERSINK ANGLE | 45.0 DEGREES MINIMUM AND 60.0 DEGREES MAXIMUM FIRST END | | COUNTERSINK ANGLE | 45.0 DEGREES MINIMUM AND 60.0 DEGREES MAXIMUM SECOND END | | HARDNESS RATING | 66.0 ROCKWELL B MINIMUM AND 92.0 ROCKWELL B MAXIMUM | | NUT DIAMETER | 5.703 INCHES MINIMUM AND 5.723 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.766 INCHES MINIMUM AND 0.791 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1035 OVERALL | | NOMINAL THREAD SIZE | 4.325 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNS | | THREAD PITCH DIAMETERS | +4.2709 TO 4.2792 INCHES | | THREAD QUANTITY PER INCH | 12 |
|
|