|
|
|
National Stock Number:
5310-00-145-2069
Federal Supply Class:
5310
National Item Identification Number:
001452069
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0N124544-5 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | COLD DRAWN 1/4 HARD CONDITION | | HOLE DIAMETER | 0.133 INCHES NOMINAL | | OVERALL DIAMETER | 0.240 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 324 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 75000 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEST DATA DOCUMENT | 98230-0N124544-5 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THICKNESS | 0.050 INCHES NOMINAL |
|
|