|
|
|
National Stock Number:
5310-00-145-1669
Federal Supply Class:
5310
National Item Identification Number:
001451669
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 400334 | 27045 | SABRE INDUSTRIES INC | | 5336237 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | CVC754-548C13 | 80378 | TRIUMPH AEROSTRUCTURES, LLC | | N0400P00069 | 09172 | GENERAL ELECTRIC CO MATERIALS INFORMATION SERVICES | | N400P69 | 09172 | GENERAL ELECTRIC CO MATERIALS INFORMATION SERVICES |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.203 INCHES MINIMUM AND 0.208 INCHES MAXIMUM | | OVERALL DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 321 OR STEEL COMP 348 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CVA1-6,FSCM 80378 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.063 INCHES NOMINAL |
|
|