|
|
|
National Stock Number:
5310-00-143-6385
Federal Supply Class:
5310
National Item Identification Number:
001436385
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| AS105419 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | AS105419 | 90299 | CHICAGO PNEUMATIC TOOL CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | OVERALL DIAMETER | 1.180 INCHES MINIMUM AND 1.187 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | VELLUMOID,FSCM 17486 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PAPER OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ST-7 FSCM 90299 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | VARNISH OVERALL | | THICKNESS | 0.031 INCHES NOMINAL |
|
|