|
|
|
National Stock Number:
5310-00-141-1933
Federal Supply Class:
5310
National Item Identification Number:
001411933
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 3320-438 | 90073 | CMC ELECTRONICS INC |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.093 INCHES NOMINAL | | BOSS DIAMETER | 0.163 INCHES MINIMUM AND 0.165 INCHES MAXIMUM | | BOSS THICKNESS | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND OVERALL | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE TYPE AND QUANTITY | 2 DRILLED | | NUT DIAMETER | 0.250 INCHES NOMINAL | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.381 INCHES MINIMUM AND 0.383 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.112 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CMC 197-117,CAGEC 90073 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES | UNC |
|
|