|
|
|
National Stock Number:
5310-00-137-8039
Federal Supply Class:
5310
National Item Identification Number:
001378039
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 732037-4 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 37.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM | | HEAT TREATMENT | AS FABRICATED | | HOLE DIAMETER | 0.6246 INCHES MINIMUM AND 0.6259 INCHES MAXIMUM | | OVERALL DIAMETER | 1.060 INCHES MINIMUM AND 1.090 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | HS178,FSCM 73030 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | TEST DATA DOCUMENT | 73030-HS447 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THICKNESS | 0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
|
|