| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.588 INCHES MINIMUM AND 0.592 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 0.173 INCHES MINIMUM NUT |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | DRY FILM LUBRICANT |
| NUT COUNTERBORE DEPTH | 0.070 INCHES MINIMUM NUT |
| NUT HEIGHT | 0.221 INCHES MAXIMUM |
| NUT LENGTH | 0.840 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| OVERALL HEIGHT | 0.405 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855, CLASS 1, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL OR ALUMINUM WASHER |
| MATERIAL | STEEL NUT |
| MATERIAL | STEEL SHELL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES NOMINAL |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| PLATE THICKNESS | 0.030 INCHES MAXIMUM |
| PLATE WIDTH | 0.443 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | CADMIUM SHELL |
| TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 225.0 FAHRENHEIT MAXIMUM |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNJC |