|
|
|
National Stock Number:
5310-00-001-1847
Federal Supply Class:
5310
National Item Identification Number:
000011847
Description:
NUT,PLAIN,SLOTTED,HEXAGON
Detail:
A nut having a flat bearing surface and 6 flat sides with slots in its upper portion. It is designed to provide positive locking when used with a solid or split (cotter) pin. Excludes NUT (1), PLAIN, CASTELLATED, HEXAGON.
|
Manufacturer Information:
| 324095-1 | 0A396 | COMPUTA-BASE-MACHINING, INC. | | 324095-1 | 0L7G0 | QUALIFIED FASTENERS INC | | 324095-1 | 0M6Y0 | INGRAM INDUSTRIES, INC. | | 324095-1 | 1PK60 | HERLEY INDUSTRIES INC | | 324095-1 | 1V517 | DUHADAWAY TOOL & DIE SHOP INC | | 324095-1 | 30828 | KROBACH MFG. CORP. | | 324095-1 | 56878 | SPS TECHNOLOGIES, LLC | | 324095-1 | 5S946 | PRE-MACH INC | | 324095-1 | 6W889 | AMMCON CORP. | | 324095-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 | | 324095-1 | 92595 | NELSON STUD WELDING, INC |
|
Techincal Specification:
| BEARING SURFACE TYPE | WASHER FACED | | CRITICALITY CODE JUSTIFICATION | SPCL | | NUT HEIGHT | 0.562 INCHES NOMINAL | | NUT STYLE | SLOTTED, HEXAGON | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | SPECIAL FEATURES | MATERIAL PER MIL-S-5000 OR MIL-S-6049; NUT HAS ROCKWELL HARDNESS OF C34-C39 IN ACCORDANCE WITH MIL-H-6875 CLASS A; 100% MAGNETIC PARTICLE INSPECTION PER MIL-I-6868 PERFORMED BY BOTH CIR. AND LONG. METHOD, THE WET OR DRY PROCESS WITH EITHER FLUOR. OR NON-FLUOR. SHALL BE USED, NO CRACKS ALLOWED; NUTS FINISHED PER QQ-P-416 TYPE II CL 3; BAKED AT 375 DEG F FOR 23 HOURS AFTER PLATING; EMBRITTLEMENT TEST PER QQ-P-416 DOES NOT APPLY; SURFACE FINISHED SHALL BE 125 UNLESS OTHERWISE SPECIFIED | | SPECIAL TEST FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS | | WIDTH ACROSS FLATS | 0.738 INCHES MINIMUM AND 0.752 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 20 |
|
|