|
|
|
National Stock Number:
5310-00-000-0079
Federal Supply Class:
5310
National Item Identification Number:
000000079
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10910174 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 10910174-33 | 19200 | US ARMY ARDEC RDECOM | | 10910174-33 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | 10910174-33 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 10910174-33 | T0720 | FNSS SAVUNMA SISTEMLERI ANONIM SIRKETI | | 12569613-33 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5310-00-000-0079 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310000000079 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM | | OVERALL DIAMETER | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8640 OR STEEL COMP 8740 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, FLAT METAL, ROUND HARDENED | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.151 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
|
|