|
|
|
National Stock Number:
5307-01-546-5883
Federal Supply Class:
5307
National Item Identification Number:
015465883
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 120-161P24N | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE AND MILS-S5000 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.2590 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.2590 INCHES STUD THREAD | | OVERALL LENGTH | 1.500 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.688 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 0.562 INCHES NOMINAL NUT THREAD | | THREAD PITCH DIAMETERS | +0.2338/+0.2353 INCHES NUT THREAD | | THREAD PITCH DIAMETERS | +0.2338/+0.2353 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD | | THREAD SERIES DESIGNATOR | UNJS STUD THREAD |
|
|