|
|
|
National Stock Number:
5307-01-546-5871
Federal Supply Class:
5307
National Item Identification Number:
015465871
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 120-161P22N | 0K6Z0 | SATURN FASTENERS INC | | 120-161P22N | 0UCY9 | M.S. AEROSPACE INC. | | 120-161P22N | 17328 | UNITED PRECISION PRODUCTS CO., INC. | | 120-161P22N | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 120-161P22N | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| OVERALL LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6382 ASSN STD 1ST MATERIAL RESPONSE AND MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6415 ASSN STD 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR AMS 6322 ASSN STD 3RD MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 AND STEEL COMP 4340 OR STEEL COMP 8740 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 2, CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD A | | THREAD DIRECTION | RIGHT-HAND NUT THREAD B | | THREAD LENGTH | 0.789 INCHES MINIMUM AND 0.791 INCHES MAXIMUM NUT THREAD B | | THREAD LENGTH | 0.915 INCHES MINIMUM AND 0.917 INCHES MAXIMUM NUT THREAD A | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD B | | THREAD SERIES DESIGNATOR | UNJS NUT THREAD A |
|
|