|
|
|
National Stock Number:
5307-01-272-1427
Federal Supply Class:
5307
National Item Identification Number:
012721427
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 5893838 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5893839 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| OVERALL LENGTH | 9.800 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4122 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SPECIAL FEATURES | FURNISH WITH FLAT POINT ON NUT END WITH 0.250 IN. DIAMETER BY 0.500 IN. LONG | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 3,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.100 INCHES MINIMUM AND 1.300 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 1.350 INCHES MINIMUM AND 1.550 INCHES MAXIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|
|