|
|
|
National Stock Number:
5307-01-216-2885
Federal Supply Class:
5307
National Item Identification Number:
012162885
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| STC90856-11 | 07132 | SPEC TOOL COMPANY |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD 1ST MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1018 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 304 OR STEEL COMP 304L | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | OVERALL LENGTH | 10.500 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | THREAD CLASS | 1A NUT THREAD | | THREAD CLASS | 1A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.250 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 1.250 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|