|
|
|
National Stock Number:
5307-01-203-4004
Federal Supply Class:
5307
National Item Identification Number:
012034004
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 10084-002 | 10396 | HERCULES INC AEROSPACE DIV BACCHUS WORKS |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP H11 | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | SPECIAL FEATURES | HEAT TREAT PER MIL-H-6875 TO 21850 LBS MIN AXIAL LOAD STRENGTH | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.000 INCHES MINIMUM AND 1.020 INCHES MAXIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD A |
|
|