|
|
|
National Stock Number:
5307-01-201-2659
Federal Supply Class:
5307
National Item Identification Number:
012012659
Description:
STUD,SHOULDERED
Detail:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. ALL OR PART OF THE UNTHREADED SECTION HAS A CROSS-SECTIONAL DIAMETER GREATER THAN THE NOMINAL STUD SIZE PLUS 0.020 INCHES (0.508 MM). IT MAY BE THREAD RELIEVED. SEE ALSO STUD, LOCKED IN.
|
Manufacturer Information:
| 33-063118-01 | 15280 | NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION | | 33-063118-01 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 52.0261.510.01 | D1901 | HENSOLDT SENSORS GMBH |
|
Techincal Specification:
| OVERALL LENGTH | 0.595 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | NOMINAL THREAD SIZE | 0.086 INCHES STUD THREAD | | NOMINAL THREAD SIZE | 0.086 INCHES NUT THREAD | | NUT END SHANK DIAMETER | 0.086 INCHES NOMINAL | | NUT END SHANK LENGTH | 0.089 INCHES NOMINAL | | SHOULDER DIAMETER | 0.125 INCHES NOMINAL | | SHOULDER LENGTH | 0.030 INCHES NOMINAL | | SPECIAL FEATURES | STUD END HAS 0.125 IN. DIA SPERICAL HEAD WITH 0.056 IN. DIA; NUT END HAS 0.085 IN. SQUARE END | | STUD END SHANK DIAMETER | 0.056 INCHES NOMINAL | | STUD END SHANK LENGTH | 0.047 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE IV FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD LENGTH | 0.157 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 0.181 INCHES NOMINAL NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD QUANTITY PER INCH | 56 NUT THREAD | | THREAD QUANTITY PER INCH | 56 STUD THREAD |
|