|
|
|
National Stock Number:
5307-01-198-8615
Federal Supply Class:
5307
National Item Identification Number:
011988615
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| MIL-S-001222G | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | S-1032 PIECE 28 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | S-1032 PIECE 28 | 93591 | PENTAIR VALVES & CONTROLS US LP DIV FLOW CONTROL US HOLDING CORP | | S-1032-28 | 93591 | PENTAIR VALVES & CONTROLS US LP DIV FLOW CONTROL US HOLDING CORP |
|
Techincal Specification:
| HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.500 INCHES MINIMUM AND 3.000 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 666 FED STD ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4142 OR STEEL COMP 4145 | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND B7 GRADE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.812 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 1.250 INCHES NOMINAL NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD QUANTITY PER INCH | 11 NUT THREAD | | THREAD QUANTITY PER INCH | 11 STUD THREAD |
|