|
|
|
National Stock Number:
5307-01-031-0242
Federal Supply Class:
5307
National Item Identification Number:
010310242
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 299C403P3 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.025 INCHES MINIMUM AND 1.040 INCHES MAXIMUM | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE FINISH | 125.0 MICROINCHES BODY | | SURFACE FINISH | 125.0 MICROINCHES SHANK | | SURFACE FINISH | 63.0 MICROINCHES NUT THD | | SURFACE FINISH | 63.0 MICROINCHES STUD THD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD LENGTH | 0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.650 INCHES MINIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|
|