|
|
|
National Stock Number:
5307-01-027-4732
Federal Supply Class:
5307
National Item Identification Number:
010274732
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 10898813 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| OVERALL LENGTH | 1.940 INCHES NOMINAL | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8640 OR STEEL COMP 8740 | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | SPECIAL FEATURES | MINIMUM ONE THREAD AND MAXIMUM TWO THREAD WITH PITCH DIA OF 0.4463 TO 0.4490 IN. | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.690 INCHES MINIMUM AND 0.810 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM AND 0.880 INCHES MAXIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.4565 TO 0.4579 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 13 STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD |
|
|