|
|
|
National Stock Number:
5307-01-009-4516
Federal Supply Class:
5307
National Item Identification Number:
010094516
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 332C253P3 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.420 INCHES MINIMUM AND 1.440 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | B50T14C OR B50T7B,FSCM 99207 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | SPECIAL FEATURES | 0.316 IN. DIA UNTHREADED PORTION | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
|
|