|
|
|
National Stock Number:
5307-01-006-5059
Federal Supply Class:
5307
National Item Identification Number:
010065059
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| PGF9769D | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | PGF9769D | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD | | OVERALL LENGTH | 2.532 INCHES MINIMUM AND 2.593 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD 1ST MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OR GR 8,FSCM 04636 MFR REF 3RD MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 1015 OR STEEL CORROSION RESISTING | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.000 INCHES MINIMUM NUT THREAD AND 1.062 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.719 INCHES MINIMUM STUD THREAD AND 0.781 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 11 STUD THREAD |
|
|