|
|
|
National Stock Number:
5307-00-841-6472
Federal Supply Class:
5307
National Item Identification Number:
008416472
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 14088827 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 14088827 | 7X677 | GENERAL MOTORS LLC | | 3760425 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 3760425 | 24617 | GENERAL MOTORS CORP | | 3760425 | 7X677 | GENERAL MOTORS LLC | | 483543 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT |
|
Techincal Specification:
| OVERALL LENGTH | 2.200 INCHES MINIMUM AND 2.230 INCHES MAXIMUM | | MATERIAL | STEEL COMP B1111 OR STEEL COMP B1112 | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SPECIAL FEATURES | WITH 0.282 IN. MIN 0.286 IN. MAX DIA BY 0.320 IN. LONG PILOT POINT ON NUT END | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD LENGTH | 0.440 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 1.320 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD PITCH DIAMETERS | +0.3360 TO 0.3380 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|