|
|
|
National Stock Number:
5307-00-840-9200
Federal Supply Class:
5307
National Item Identification Number:
008409200
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 99-583-01-2 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.125 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 3.438 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SURFACE FINISH | 150.0 MICROINCHES OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.688 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD PITCH DIAMETERS | +0.3425 TO 0.3449 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
|
|