5307-00-807-5022 STUD,PLAIN Index 5307-00-807-5026 STUD,PLAIN

National Stock Number:
5307-00-807-5025

Federal Supply Class:
5307

National Item Identification Number:
008075025

Description:
STUD,PLAIN

Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.


Manufacturer Information:
AN1284240U583SAE INTERNATIONAL
AN12842481343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AN12842488044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE


Techincal Specification:
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END0.110 INCHES NOMINAL FIRST HOLE
COTTER PIN HOLE DIAMETER0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
OVERALL LENGTH1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 8740
NOMINAL THREAD SIZE0.250 INCHES NUT THREAD
NOMINAL THREAD SIZE0.250 INCHES STUD THREAD
SURFACE FINISH63.0 MICROINCHES SHANK
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS3A NUT THREAD
THREAD DIRECTIONRIGHT-HAND NUT THREAD
THREAD DIRECTIONRIGHT-HAND STUD THREAD
THREAD LENGTH0.562 INCHES MINIMUM NUT THREAD
THREAD LENGTH0.688 INCHES MINIMUM STUD THREAD
THREAD PITCH DIAMETERS+0.2218 TO 0.2233 INCHES STUD THREAD
THREAD SERIES DESIGNATORUNF NUT THREAD
THREAD SERIES DESIGNATORUNS STUD THREAD
THREAD QUANTITY PER INCH20 STUD THREAD
THREAD QUANTITY PER INCH28 NUT THREAD


Click here to Register for Free 30-day Trial