|
|
|
National Stock Number:
5307-00-807-2078
Federal Supply Class:
5307
National Item Identification Number:
008072078
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 232499P-012 | 77445 | RTX CORPORATION | | 232499P012 | 77445 | RTX CORPORATION | | 232499P12 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.053 INCHES MINIMUM AND 2.073 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7456 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.812 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 1.000 INCHES MINIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.3512 TO 0.3527 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|