|
|
|
National Stock Number:
5307-00-800-0301
Federal Supply Class:
5307
National Item Identification Number:
008000301
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 8000301 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| OVERALL LENGTH | 1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 416 | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 13 NUT THREAD | | THREAD QUANTITY PER INCH | 13 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|
|