|
|
|
National Stock Number:
5307-00-792-7115
Federal Supply Class:
5307
National Item Identification Number:
007927115
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| LT1149 | 56055 | PRECISION SPEED MANUFACTURING, LLC |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.510 INCHES MINIMUM AND 1.540 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6382 ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4340 OR STEEL COMP 4140 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.815 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 0.580 INCHES MINIMUM AND 0.590 INCHES MAXIMUM STUD THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|